Specification
|
Concerning Product: |
| Article number | 3344181LPEG |
| Trade name / designation / denomination | Tri-Magnesiumdicitrat wasserfrei,EP ASMF |
| CAS number | 3344-18-1 |
| Other names / synonyms | •Magnesium citrate;
•trimagnesium 2-hydroxypropane-1,2,3-tricarboxylate;
•trimagnesium dicitrate; |
| EC number | 222-093-9 |
| Customs tariff number / CN code / TARIC | 29181500 |
| Molecular weight [g / mol] | 451.1144 |
| Formula | C12H10Mg3O14 |
| Parameter |
Test Method |
Specification |
Unit |
Organoleptic test |
| Appearance of solution |
(5%) |
complies |
|
| Colour |
|
white |
|
Physical parameter |
| Form |
|
powder |
|
| Loss on drying |
(180° C/ 5h) |
≤ 3,5 |
% |
| pH value |
(5%) |
6,0 – 8,5 |
|
Identity |
| Assay |
|
Mg (o.d.b.*) 14,0 – 16,0 |
% |
| Identification |
Ph.Eur. |
Citrate: complies |
| Identification |
Ph.Eur. |
Magnesium: complies |
Impurities |
| Oxalate (as anhydros Oxalic Acid) |
(C2H2O4) |
≤ 280 |
ppm |
| Sulphates (SO4) |
|
≤ 0,2 |
% |
Elemental Impurities |
| Calcium (Ca) |
|
≤ 0,2 |
% |
| Iron (Fe) |
|
≤ 100 |
ppm |
| Nickel (Ni) |
|
≤ 20 |
ppm |
Microbiological data |
| Total Plate Count |
|
≤ 2000 |
CFU/g |
| Yeast and Mould |
|
≤ 200 |
CFU/g |
Annotation:
o.d.b. = on dried basis / auf getrockneter Basis
Regulatory information:
Residual solvents:
During production, filling and storage the product does not come in contact with the in Ph.Eur. (I 283/95) mentioned organic solvents.
Supplemental information:
Note:
Heavy metal parameters of this specification were set according to I-Guideline Q3D on elementary contaminants based on a product-related risk assessment. The risk assessment was carried out considering option 1 (maximum daily dose 10 g/d) for oral use. Unless otherwise mentioned or specified, the presence of Class 1-3 elements (classification according to ICH Q3D) above the Q3D Option 1 limit is not likely to occur.
Other items are not knowingly added. The specification includes monograph-specific element impurities. These will continue to be considered in the specification according to the monograph specification.
Chemische Werke Hommel GmbH & Co.KG
This document was generated electronically and is valid without signature.
|
Waltrop, 24. Jun. 2019
|
We only confirm that we took over the data from our supplier accordingly. Despite careful working, errors in the
takeover are not totally excluded. Some or all parts off the document may be translated due to our best knowledge from the original
to give a better understanding. If you have any questions about specific details, please call us directly. Unless otherwise marked,
these data do not originate from us and have not been tested by us on the correctness. The above information corresponds to the present state of our
knowledge and is intended as a general description of our products and their possible applications. We make no warranties, expressed
or implied, as to the information's accuracy, adequacy, sufficiency or freedom from defect and assumes no liability in connection with any
use of this information. Any user of this product is responsible for determining the suitability of our products for its particular application.
The foregoing information does not absolve the buyer of its own tests. Observing existing laws and regulations, is the responsibility of the buyer of our product.
Nothing included in this information waives any of our General Terms and Conditions of Sale, which control unless it agrees other in
writing. Any existing intellectual/industrial property rights must be observed. Due to possible changes in our products and applicable
national and international regulations and laws, the status of our products could change. Material Safety Data Sheets providing safety
precautions, that should be observed when handling or storing our products, are available upon request and are provided in compliance
with applicable law. The user should obtain and review the applicable Material Safety Data Sheet information before handling any of
these products. For additional information, please contact us.
|
|
