Specification
|
Concerning Product: |
| Article number | 7447418ATI |
| Trade name / designation / denomination | Lithium Chloride, technisch, grob |
| CAS number | 7447-41-8 |
| Other names / synonyms | •lithium chloride; |
| EC number | 231-212-3 |
| Customs tariff number / CN code / TARIC | 28273985 |
| Molecular weight [g / mol] | 42,39 |
| Formula | LiCl
ClLi |
Warning
|
Harmful if swallowed. Causes skin irritation. Causes serious eye irritation. May cause respiratory irritation.
Avoid breathing dust/fume/gas/mist/vapours/spray. IF IN EYES: Remove contact lenses, if present and easy to do. Continue rinsing. Rinse cautiously with water for several minutes. Wash with plenty of soap and water. |
| Parameter |
Test Method |
Specification |
Unit |
Organoleptic test |
| Appearance |
|
crystalline powder |
| Colour |
|
colorless |
|
Physical parameter |
| Density |
|
2.1 g/cm³ @ 20 °C |
| Loss on drying |
Gravimetry |
(@ 400 °C) ≤ 0,5 |
% |
| Melting range |
|
@ 1013 hPa: ≥ 609 |
°C |
| Bulk density |
|
~ 1000 kg/m³ |
|
| Boiling range |
|
≥ 1382 |
°C |
| Solubility |
OECD Test Guideline 105 |
in H2O: 569 g/L @ 20 °C |
| Specific weight |
|
~ 2,068 g/ccm |
|
Identity |
| Assay |
Titrat. |
≥ 99,2 |
% |
Elemental Impurities |
| Sodium (Na) |
FES/AAS |
≤ 0,35 |
% |
Particle size distribution |
| Particles |
|
90% 0,1 – 1 |
mm |
Supplemental information:
Storage conditions:
Lithium chloride is hygroscopic and must therefore be stored under exclusion of humidity (e.g. in tightly closed drums or other containers).
Packing:
50 kg polyethylene bags in clamping ring drums and 600 kg big bags.
Smaller quantities have to be filled separately.
Usage:
Fluxes for welding and soldering techniques; salt bath for heat-treatment by low temperature and for dip brazing; raw material for other lithium compounds; tracer for chemical products (denaturation of wine etc.); absorption and desinfection reagent (lithium chloride solution) for absorbers.
Chemische Werke Hommel GmbH & Co.KG
This document was generated electronically and is valid without signature.
|
Waltrop, 18. Sep. 2019
|
We only confirm that we took over the data from our supplier accordingly. Despite careful working, errors in the
takeover are not totally excluded. Some or all parts off the document may be translated due to our best knowledge from the original
to give a better understanding. If you have any questions about specific details, please call us directly. Unless otherwise marked,
these data do not originate from us and have not been tested by us on the correctness. The above information corresponds to the present state of our
knowledge and is intended as a general description of our products and their possible applications. We make no warranties, expressed
or implied, as to the information's accuracy, adequacy, sufficiency or freedom from defect and assumes no liability in connection with any
use of this information. Any user of this product is responsible for determining the suitability of our products for its particular application.
The foregoing information does not absolve the buyer of its own tests. Observing existing laws and regulations, is the responsibility of the buyer of our product.
Nothing included in this information waives any of our General Terms and Conditions of Sale, which control unless it agrees other in
writing. Any existing intellectual/industrial property rights must be observed. Due to possible changes in our products and applicable
national and international regulations and laws, the status of our products could change. Material Safety Data Sheets providing safety
precautions, that should be observed when handling or storing our products, are available upon request and are provided in compliance
with applicable law. The user should obtain and review the applicable Material Safety Data Sheet information before handling any of
these products. For additional information, please contact us.
|
|
