Specification
|
Concerning Product: |
| Article number | 30111 |
| Trade name / designation / denomination | Kolloidschwefel 50% |
| CAS number | 7704-34-9 |
| Other names / synonyms | •sulfur;
•sulfur, precipitated, sublimed or colloidal; |
| EC number | 231-722-6 |
| EC index number | 016-094-00-1 |
| Molecular weight [g / mol] | 32,07 |
| Formula | S1 (bzw. S8) |
Warning
1350, ADR/RID Kl. 4,1, III |
Causes skin irritation.
Wash with plenty of soap and water. |
| Parameter |
Specification |
Unit |
Organoleptic test |
| Appearance |
Colloidal Sulfur 50 % is a very fine wet-milled Sulfur with a dispersing agent and is particularly suitable for the production of thin and transparent latex films. |
| Colour |
yellowish |
|
Physical parameter |
| Density |
20°C ≤ 1.37 |
g/cm |
| Form |
viscous dispersion |
| pH value |
Konzentration: 1 % 9 – 11 |
| Boiling range |
≤ 100 |
°C |
| Solubility |
in Water: insoluble
in Acetone: soluble |
Elemental Impurities |
| Sulfur (S) |
50 – 54 |
% |
Particle size distribution |
| Particles |
≤ 5 |
µm |
Supplemental information:
Derivation:
sulfur dispersion in water
Note:
Sulfur sediments originated during storage can be re-suspended by stirring or shaking.
Storage conditions:
In original closed containers under cool (approximately 25 °C) conditions 365 days from date of production.
Packing:
60 l (82.8 kg) HDPE hobbock on 496.8 kg skid.
Chemische Werke Hommel GmbH & Co.KG
This document was generated electronically and is valid without signature.
|
Waltrop, 06. Nov. 2019
|
We only confirm that we took over the data from our supplier accordingly. Despite careful working, errors in the
takeover are not totally excluded. Some or all parts off the document may be translated due to our best knowledge from the original
to give a better understanding. If you have any questions about specific details, please call us directly. Unless otherwise marked,
these data do not originate from us and have not been tested by us on the correctness. The above information corresponds to the present state of our
knowledge and is intended as a general description of our products and their possible applications. We make no warranties, expressed
or implied, as to the information's accuracy, adequacy, sufficiency or freedom from defect and assumes no liability in connection with any
use of this information. Any user of this product is responsible for determining the suitability of our products for its particular application.
The foregoing information does not absolve the buyer of its own tests. Observing existing laws and regulations, is the responsibility of the buyer of our product.
Nothing included in this information waives any of our General Terms and Conditions of Sale, which control unless it agrees other in
writing. Any existing intellectual/industrial property rights must be observed. Due to possible changes in our products and applicable
national and international regulations and laws, the status of our products could change. Material Safety Data Sheets providing safety
precautions, that should be observed when handling or storing our products, are available upon request and are provided in compliance
with applicable law. The user should obtain and review the applicable Material Safety Data Sheet information before handling any of
these products. For additional information, please contact us.
|
|
